Đang tải trang
Liên hệ
Sản phẩm cần báo giá theo số lượng, công suất hoặc dự án. Gửi yêu cầu để được tư vấn nhanh.
Tổng quan
XGK, XGI CPU Contact us Features XGK CPU (Lập trình Ladder tiêu chuẩn của LS) CPU cao cấp dành cho ứng dụng tốc độ cao và quy mô lớn XGK-CPUUN Processing speed: 8.5ns/step Program capacity: 256K steps I/O points: 6,144 I/O device point: 65,536 (Remote I/O) XGK-CPUHN • Program capacity: 128K steps • I/O points: 6,144 • I/O device point: 65,536 (Remote I/O) • Processing speed: 8.5ns/step XGK-CPUSN • Program capacity: 64K steps • I/O points: 3,072 • I/O device point: 65,536 (Remote I/O) • Processing speed: 8.5ns/step XGK-CPUU (Ultra capacity) • Program capacity: 128K steps • I/O points: 6,144 • I/O device point: 32,768 (Remote I/O) • Processing speed: 28ns/step XGK-CPUH (High performance) • Program capacity: 64K steps • I/O points: 6,144 • I/O device point: 32,768 (Remote I/O) • Processing speed: 28ns/step XGK-CPUA (Advanced) • Program capacity: 32K steps • I/O points: 3,072 • I/O device point: 32,768 (Remote I/O) • Processing speed: 28ns/step Bộ xử lý PLC điều khiển trình tự thông dụng XGK-CPUS (Standard) • Program capacity: 32K steps • I/O points: 3,072 • I/O device point: 32,768 (Remote I/O) • Processing speed: 84ns/step XGK-CPUE (Economic) • Program capacity: 16K step • I/O point: 1,536 • I/O device point: 32,768 (Remote I/O) • Processing speed: 84ns/step XGI CPU (Lập trình theo tiêu chuẩn IEC) CPU cao cấp dành cho các ứng dụng tốc độ cao và quy mô lớn XGI-CPUUN Processing speed: 8.5ns/step Program capacity: 2MBytes I/O points: 6,144 I/O device point: 131,072 (Remote I/O) XGI-CPUU • Program capacity: 1MBytes • I/O points: 6,144 • I/O device point: 131,072 (Remote I/O) • Processing speed: 28ns/step XGI-CPUH • Program capacity: 512KBytes • I/O points: 6,144 • I/O device point: 131,072 (Remote I/O) • Processing speed: 28ns/step Bộ xử lý PLC điều khiển trình tự thông dụng XGI-CPUS (IEC Standard) • Program capacity: 128KBytes • I/O points: 3,072 • I/O device point: 32,768 (Remote I/O) • Processing speed: 28ns/step XGI-CPUE (IEC Standard) Processing speed: 84ns/step Program capacity: 64KBytes I/O points: 1,536 I/O device point: 32,768 (Remote I/O) Specification XGK CPU ItemDescriptionRemarks XGK-CPUUNXGK-CPUHNXGK-CPUSN Operation methodCyclic execution of stored program, Time-driven interrupt, Process-driven interrupt I/O control methodBatch processing by scan synchronization (Refresh), Direct input/output by instruction Program languageLadder diagram, Instruction list, SFC(Sequential Function Chart), ST(Structured Text) Number of instructionsBasic40 Application700 Processing speedLD0.0085㎲/step MOVE0.255㎲/step Real number operation± : 182.2ns(S), 327.3ns(D)S: Single real number D: Double real number X : 336ns(S), 427ns(D) ÷ : 345ns(S), 808ns(D) Program capacity256Kstep (2,048KB)128Kstep (1,024KB)64Kstep (512KB) I/O points(availableto install)6,1446,1443,072 Data areaPP00000 ~ P4095F(65,536 points ) MM00000 ~ M4095F(65,536 points ) KK00000 ~ K4095F(65,536 points ) LL0000 ~ L11263F(180,224 points ) FF0000 ~ F4095F(65,536 points ) T100ms : T0000 - T2999Timer (Adjustable) 10ms : T3000 - T5999 1ms : T6000 - T7999 0.1ms : T8000 - T8191 CC0000 ~ C4095 SS00.00 ~ S255.99 DD0000 ~ D524287D0000 ~ D262143 UU0.0~U7F.31U0.0~U3F.31Special module data refresh area Z256 points NN00000 ~ N21503 R16 block8 block2 block32Kwordper1block(R0~R32767) Flash area2M byte, 32 blocksControllable by R device Program typeTotal program256 Initialization1 (_INT) Time-driven32 Internal32 Operation modeRUN, STOP, DEBUG Self-diagnosisExecution, Delay, Memory error, I/O error, Battery error, Power errorModbus slave Programming portRS-232C (1Ch), USB (1Ch) Data retention at power failureSet “retain” at data declaration Max. expansion stage73Total length 15m Current consumption (mA)960 Weight (Kg)0.12 XGI CPU ItemDescriptionRemarks XGK-CPUUXGK-CPUHXGK-CPUAXGK-CPUSXGK-CPUE Operation methodCyclic execution of stored program, Time-driven interrupt, Process-driven interrupt- I/O control methodBatch processing by scan synchronization (Refresh), Direct input/output by instruction- Program languageLadder diagram, Instruction list, SFC(Sequential Function Chart), ST(Structured Text)- Number of instructionsBasic40- Application700- Processing speedLD0.028㎲/Step0.084㎲/Step- MOVE0.084㎲/Step0.252㎲/Step- Real number operation ± : 0.602㎲(S), 1.078㎲(D) X : 1.106㎲(S), 2.394㎲(D) ÷ : 1.134㎲(S), 2.66㎲(D) ± : 1.442㎲(S), 2.87㎲(D) X : 1.948㎲(S), 4.186㎲(D) ÷ : 1.442㎲(S), 4.2㎲(D)S: Single real number D: Double real number Program capacity128Kstep(512KB)64Kstep(256KB)32Kstep(128KB)16Kstep(64KB)- I/O points(availableto install)6,1443,0721,536- Data areaPP00000 ~ P2047F(32,768 points)- MM00000 ~ M2047F(32,768 points)- KK00000 ~ K2047F(32,768 points)- LL0000 ~ L11263F(180,224 points)- FF0000 ~ F2047F(32,768 points)- T 10ms : T1000 - T1499 100ms : T0000 - T0999 1ms : T2000 - T2047 1ms : T1500 - T1999- CC0000 ~ C2047 SS00.00 ~ S127.99 DD0000 ~ D32,767D0000 ~ D19,999 UU0.0~U7F.31U0.0~U3F.31U0.0~U3F.31U0.0~U1F.31Special module data refresh area Z128 points NN00000 ~ N21503- R2 block1 block32Kwordper1block(R0~R32767) Flash area2M byte, 32 blocksControllable by R device Program typeTotal program256 Initialization1 (_INT) Time-driven32 Internal32 Operation modeRUN, STOP, DEBUG Self-diagnosisExecution, Delay, Memory error, I/O error, Battery error, Power errorModbus slave Programming portRS-232C (1Ch), USB (1Ch) Data retention at power failureSet “retain” at data declaration Max. expansion stage731Total length 15m Current consumption (mA)960940 Weight (Kg)0.12 XGK/XGI CPU built-in Ethernet specification ItemXGI-CPUUNXGI-CPUU/DXGI-CPUUXGI-CPUHXGI-CPUSXGI-CPUERemarks Operation systemReiterative operation, fixed cycle operation, constant scan I/O Control systemScan synchronous batch processing system(refresh system), direct system by command Program languageLadder Diagram, SFC (Sequential Function Chart), ST (Structured Text) Operation processing speed (basic command)Operator18 Basic function136 types + real number operation function Basic function block43 Dedicated function blockDedicated function blocks by special function modules, communication dedicated function block(P2P) Basic0.0085㎲/step0.028㎲/step0.084㎲/step MOVE0.255㎲/step0.084㎲/step0.252㎲/step Real number operation ± : 0.119㎲(S), 0.281㎲(D) X : 0.272㎲(S), 0.680㎲(D) ÷ : 0.281㎲(S), 0.685㎲(D) ± : 0.392㎲(S), 0.924㎲(D) X : 0.896㎲(S), 2.240㎲(D) ÷ : 0.924㎲(S), 2.254㎲(D) ± : 1.442㎲(S), 2.87㎲(D) X : 1.948㎲(S), 4.186㎲(D) ÷ : 1.442㎲(S), 4.2㎲(D)S: Single real number D: Double real number Program memory capacity2M1M512KB128KB64KB I/O points (installable)6,144 points3,072 points1,536 points Max. I/O memory contact131,072 points32,768 points Data memorySymbolic variable area(A)1024KB (max. 512KB retain settable)512KB (max. 256KB retain settable)128KB (max. 64KB retain settable)64KB (max. 32KB retain settable) I variable(I)16KB4KB Q variable(I)16KB4KB Direct variableM512KB (max. 256KB retain settable)256KB (max. 128KB retain settable)64KB (max. 32KB retain settable)32KB (max. 16KB retain settable) R64KB X 16block64KB X 2block64KB X 1block32KB X 1block W1,024KB128KB64KByte32KByteR Flag variableF8KB4KBSystem flag K16KB4KBPID flag L22KBHigh speed link flag N42KBP2PParameters U8KB4KB2KBAnalog data Refresh Flash area2MB, 32block1MB, 16block TimerNo point limit Time range: 0.001~ 4,294,967.295 second(1,193 hours)20 bytes of symbolic variable area per point CounterNo point limit Coefficient range : 64 bit expression8 bytes of symbolic variable area per point Program structureTotal no. of programs256 Initialization task1 Fixed cycle task32 Internal device task32 Operation modeRUN, STOP, DEBUG Restart modeCold, Warm Self diagnosisOperation delay monitoring, memory fault, I/O fault, battery fault, power fault and etc Data protection in case of power failureRetain area setting by basic parameters Max. base extension731Total length 15m Current consumption(mA)960mA940mA Weight (kg)0.12kg More Information ItemXGK-CPUSN, CPUHN, CPUUN / XGI-CPUUNRemarks EthernetFeature1 Port- 10/100BASE-TX- Auto negotiation (Full-duplex and half duplex)- Auto MDIX Crossover- Max. Support 4 channelSupport 8Kbyte each send and receive channel Max. Distance between nodes : 100m- Max. Protocol size : 1500ByteIP Fragmentation is not supported. CableUTP, STP, FTP cables is availableFTP, STP is recommended to prevent noise ServiceSetting communication parameters with XG5000- Loader service (XG5000 connection) supportedRemote stage 1 connection with PLC is available LS protocol(XGT) supported.Server & TCP supported. Client & UDP not supported. Other company’s protocol (Modbus TCP/IP) supported
| 3 | Total length 15m |
|---|---|
| 40 | - |
| C | C0000 ~ C4095 | C0000 ~ C2047 |
| D | D0000 ~ D524287 | D0000 ~ D262143 | D0000 ~ D32,767 | D0000 ~ D19,999 |
| F | F0000 ~ F4095F(65,536 points ) | F0000 ~ F2047F(32,768 points) | - |
| K | K00000 ~ K4095F(65,536 points ) | K00000 ~ K2047F(32,768 points) | - | 16KB |
| L | L0000 ~ L11263F(180,224 points ) | L0000 ~ L11263F(180,224 points) | - | 22KB | High speed link flag |
| M | M00000 ~ M4095F(65,536 points ) | M00000 ~ M2047F(32,768 points) | - |
| N | N00000 ~ N21503 | N00000 ~ N21503 | - | 42KB | P2PParameters |
| R | 16 block | 2 block | 64KB X 16block |
| S | S00.00 ~ S255.99 | S00.00 ~ S127.99 |
| T | 100ms : T0000 - T2999 | Timer (Adjustable) | 10ms : T1000 - T1499 100ms : T0000 - T0999 1ms : T2000 - T2047 1ms : T1500 - T1999 | - |
| U | U0.0~U7F.31 | 8KB |
| W | 1,024KB |
| X | 336ns(S), 427ns(D) | 1.106㎲(S), 2.394㎲(D) | 1.948㎲(S), 4.186㎲(D) | 0.272㎲(S), 0.680㎲(D) | 0.896㎲(S), 2.240㎲(D) |
| Z | 256 points | 128 points |
| 1M | 512KB |
| ÷ | 345ns(S), 808ns(D) | 1.134㎲(S), 2.66㎲(D) ± : 1.442㎲(S), 2.87㎲(D) | 1.442㎲(S), 4.2㎲(D)S: Single real number D: Double real number | 0.281㎲(S), 0.685㎲(D) ± : 0.392㎲(S), 0.924㎲(D) | 0.924㎲(S), 2.254㎲(D) ± : 1.442㎲(S), 2.87㎲(D) |
| 1ms | T6000 - T7999 | T2000 - T2047 1ms : T1500 - T1999- |
| 4KB | PID flag | 2KB |
| 8KB | 4KB |
| 10ms | T3000 - T5999 |
| Item | Description | Remarks | XGI-CPUUN | XGK-CPUSN, CPUHN, CPUUN / XGI-CPUUN | Remarks |
| MOVE | 0.255㎲/step | 0.084㎲/Step |
| 0.1ms | T8000 - T8191 |
| 128KB | 64KB | 64KByte |
| 3,072 | 1,536 |
| 6,144 | 3,072 |
| Basic | 0.0085㎲/step |
| Cable | UTP, STP, FTP cables is available | FTP, STP is recommended to prevent noise |
| Timer | No point limitTime range: 0.001~ 4,294,967.295 second(1,193 hours) | 20 bytes of symbolic variable area per point |
| 1 Port | - |
| T 10ms | T1000 - T1499 100ms : T0000 - T0999 |
| T100ms | T0000 - T2999Timer (Adjustable) |
| 1 block | 32Kwordper1block(R0~R32767) |
| 32KByte | R |
| 8 block | 2 block |
| Counter | No point limit Coefficient range : 64 bit expression | 8 bytes of symbolic variable area per point |
| Service | Setting communication parameters with XG5000 | - |
| Ethernet | Feature |
| Internal | 32 |
| XGI-CPUE | Remarks |
| XGI-CPUH | XGI-CPUS |
| XGK-CPUA | XGK-CPUS |
| XGK-CPUU | XGK-CPUH |
| Data area | P | P00000 ~ P4095F(65,536 points ) |
| I/O point | 1,536 |
| XGK-CPUUN | XGK-CPUHN | XGK-CPUSN |
| Flash area | 2M byte, 32 blocks | Controllable by R device | 2MB, 32block | 1MB, 16block |
| I/O points | 6,144 | 3,072 | 1,536 |
| Time range | 0.001~ 4,294,967.295 second(1,193 hours)20 bytes of symbolic variable area per point |
| XGI-CPUU/D | XGI-CPUU |
| Application | 700 | 700 | - |
| Data memory | Symbolic variable area(A) |
| Time-driven | 32 |
| U0.0~U1F.31 | Special module data refresh area |
| U0.0~U3F.31 | Special module data refresh area |
| Weight (Kg) | 0.12 |
| Weight (kg) | 0.12kg |
| 3,072 points | 1,536 points |
| Program type | Total program | 256 |
| Restart mode | Cold, Warm |
| 0.028㎲/Step | 0.084㎲/Step |
| 0.028㎲/step | 0.084㎲/step |
| 0.084㎲/step | 0.252㎲/step |
| 0.252㎲/Step | - |
| 10/100BASE-TX | - |
| 16Kstep(64KB) | - |
| 64KB X 2block | 64KB X 1block |
| Flag variable | F |
| I variable(I) | 16KB | 4KB |
| Q variable(I) | 16KB | 4KB |
| 64Kstep(256KB) | 32Kstep(128KB) |
| Basic function | 136 types + real number operation function |
| Initialization | 1 (_INT) |
| Operation mode | RUN, STOP, DEBUG |
| Self diagnosis | Operation delay monitoring, memory fault, I/O fault, battery fault, power fault and etc |
| Self-diagnosis | Execution, Delay, Memory error, I/O error, Battery error, Power error | Modbus slave |
| Direct variable | M |
| Thương hiệu | LS Electric |
| Fixed cycle task | 32 |
| I/O device point | 65,536 (Remote I/O) | 32,768 (Remote I/O) | 131,072 (Remote I/O) |
| Operation method | Cyclic execution of stored program, Time-driven interrupt, Process-driven interrupt | Cyclic execution of stored program, Time-driven interrupt, Process-driven interrupt | - |
| Operation system | Reiterative operation, fixed cycle operation, constant scan |
| Processing speed | LD | 0.0085㎲/step | 8.5ns/step | 28ns/step | 84ns/step |
| Program capacity | 256Kstep (2,048KB) | 128Kstep(512KB) | 256K steps | 128K steps | 64K steps | 32K steps | 16K step | 2MBytes | 1MBytes | 512KBytes | 128KBytes | 64KBytes |
| Program language | Ladder diagram, Instruction list, SFC(Sequential Function Chart), ST(Structured Text) | Ladder diagram, Instruction list, SFC(Sequential Function Chart), ST(Structured Text) | - | Ladder Diagram, SFC (Sequential Function Chart), ST (Structured Text) |
| Programming port | RS-232C (1Ch), USB (1Ch) |
| Program structure | Total no. of programs | 256 |
| 128Kstep (1,024KB) | 64Kstep (512KB) |
| I/O Control system | Scan synchronous batch processing system(refresh system), direct system by command |
| I/O control method | Batch processing by scan synchronization (Refresh), Direct input/output by instruction | Batch processing by scan synchronization (Refresh), Direct input/output by instruction | - |
| Max. Protocol size | 1500ByteIP Fragmentation is not supported. |
| Auto MDIX Crossover | - |
| Initialization task | 1 |
| Max. base extension | 7 |
| Basic function block | 43 |
| Internal device task | 32 |
| Max. expansion stage | 7 |
| Real number operation | ± : 182.2ns(S), 327.3ns(D) | S: Single real number D: Double real number | ± : 0.602㎲(S), 1.078㎲(D) X : 1.106㎲(S), 2.394㎲(D) ÷ : 1.134㎲(S), 2.66㎲(D) | ± : 0.119㎲(S), 0.281㎲(D) X : 0.272㎲(S), 0.680㎲(D) ÷ : 0.281㎲(S), 0.685㎲(D) |
| Max. Support 4 channel | Support 8Kbyte each send and receive channel |
| Number of instructions | Basic | 40 |
| Current consumption(mA) | 960mA | 940mA |
| Max. I/O memory contact | 131,072 points | 32,768 points |
| Program memory capacity | 2M |
| Real number operation± | 182.2ns(S), 327.3ns(D)S: Single real number D: Double real number |
| Current consumption (mA) | 960 | 960 | 940 |
| Dedicated function block | Dedicated function blocks by special function modules, communication dedicated function block(P2P) |
| I/O points (installable) | 6,144 points |
| Real number operation ± | 0.602㎲(S), 1.078㎲(D) | 0.119㎲(S), 0.281㎲(D) |
| LS protocol(XGT) supported. | Server & TCP supported. Client & UDP not supported. |
| Max. Distance between nodes | 100m- |
| Max. Protocol size : 1500Byte | IP Fragmentation is not supported. |
| P00000 ~ P2047F(32,768 points) | - |
| Data retention at power failure | Set “retain” at data declaration |
| I/O points(availableto install) | 6,144 |
| 64KB (max. 32KB retain settable) | 32KB (max. 16KB retain settable) |
| 128KB (max. 64KB retain settable) | 64KB (max. 32KB retain settable) |
| 512KB (max. 256KB retain settable) | 256KB (max. 128KB retain settable) |
| Max. Distance between nodes : 100m | - |
| 1024KB (max. 512KB retain settable) | 512KB (max. 256KB retain settable) |
| CounterNo point limit Coefficient range | 64 bit expression8 bytes of symbolic variable area per point |
| Data protection in case of power failure | Retain area setting by basic parameters |
| Operation processing speed (basic command) | Operator | 18 |
| Loader service (XG5000 connection) supported | Remote stage 1 connection with PLC is available |
| Auto negotiation (Full-duplex and half duplex) | - |
| ± : 1.442㎲(S), 2.87㎲(D) X : 1.948㎲(S), 4.186㎲(D) ÷ : 1.442㎲(S), 4.2㎲(D) | S: Single real number D: Double real number |
| ± : 0.392㎲(S), 0.924㎲(D) X : 0.896㎲(S), 2.240㎲(D) ÷ : 0.924㎲(S), 2.254㎲(D) | ± : 1.442㎲(S), 2.87㎲(D) X : 1.948㎲(S), 4.186㎲(D) ÷ : 1.442㎲(S), 4.2㎲(D) |
Contact us Features XGK CPU (Lập trình Ladder tiêu chuẩn của LS) CPU cao cấp dành cho ứng dụng tốc độ cao và quy mô lớn XGK-CPUUN Processing speed: 8.5ns/step Program capacity: 256K steps I/O points: 6,144 I/O device point: 65,536 (Remote I/O) XGK-CPUHN • Program capacity: 128K steps • I/O points: 6,144 • I/O device point: 65,536 (Remote I/O) • Processing speed: 8.5ns/step XGK-CPUSN • Program capacity: 64K steps • I/O points: 3,072 • I/O device point: 65,536 (Remote I/O) • Processing speed: 8.5ns/step XGK-CPUU (Ultra capacity) • Program capacity: 128K steps • I/O points: 6,144 • I/O device point: 32,768 (Remote I/O) • Processing speed: 28ns/step XGK-CPUH (High performance) • Program capacity: 64K steps • I/O points: 6,144 • I/O device point: 32,768 (Remote I/O) • Processing speed: 28ns/step XGK-CPUA (Advanced) • Program capacity: 32K steps • I/O points: 3,072 • I/O device point: 32,768 (Remote I/O) • Processing speed: 28ns/step Bộ xử lý PLC điều khiển trình tự thông dụng XGK-CPUS (Standard) • Program capacity: 32K steps • I/O points: 3,072 • I/O device point: 32,768 (Remote I/O) • Processing speed: 84ns/step XGK-CPUE (Economic) • Program capacity: 16K step • I/O point: 1,536 • I/O device point: 32,768 (Remote I/O) • Processing speed: 84ns/step XGI CPU (Lập trình theo tiêu chuẩn IEC) CPU cao cấp dành cho các ứng dụng tốc độ cao và quy mô lớn XGI-CPUUN Processing speed: 8.5ns/step Program capacity: 2MBytes I/O points: 6,144 I/O device point: 131,072 (Remote I/O) XGI-CPUU • Program capacity: 1MBytes • I/O points: 6,144 • I/O device point: 131,072 (Remote I/O) • Processing speed: 28ns/step XGI-CPUH • Program capacity: 512KBytes • I/O points: 6,144 • I/O device point: 131,072 (Remote I/O) • Processing speed: 28ns/step Bộ xử lý PLC điều khiển trình tự thông dụng XGI-CPUS (IEC Standard) • Program capacity: 128KBytes • I/O points: 3,072 • I/O device point: 32,768 (Remote I/O) • Processing speed: 28ns/step XGI-CPUE (IEC Standard) Processing speed: 84ns/step Program capacity: 64KBytes I/O points: 1,536 I/O device point: 32,768 (Remote I/O) Specification XGK CPU ItemDescriptionRemarks XGK-CPUUNXGK-CPUHNXGK-CPUSN Operation methodCyclic execution of stored program, Time-driven interrupt, Process-driven interrupt I/O control methodBatch processing by scan synchronization (Refresh), Direct input/output by instruction Program languageLadder diagram, Instruction list, SFC(Sequential Function Chart), ST(Structured Text) Number of instructionsBasic40 Application700 Processing speedLD0.0085㎲/step MOVE0.255㎲/step Real number operation± : 182.2ns(S), 327.3ns(D)S: Single real number D: Double real number X : 336ns(S), 427ns(D) ÷ : 345ns(S), 808ns(D) Program capacity256Kstep (2,048KB)128Kstep (1,024KB)64Kstep (512KB) I/O points(availableto install)6,1446,1443,072 Data areaPP00000 ~ P4095F(65,536 points ) MM00000 ~ M4095F(65,536 points ) KK00000 ~ K4095F(65,536 points ) LL0000 ~ L11263F(180,224 points ) FF0000 ~ F4095F(65,536 points ) T100ms : T0000 - T2999Timer (Adjustable) 10ms : T3000 - T5999 1ms : T6000 - T7999 0.1ms : T8000 - T8191 CC0000 ~ C4095 SS00.00 ~ S255.99 DD0000 ~ D524287D0000 ~ D262143 UU0.0~U7F.31U0.0~U3F.31Special module data refresh area Z256 points NN00000 ~ N21503 R16 block8 block2 block32Kwordper1block(R0~R32767) Flash area2M byte, 32 blocksControllable by R device Program typeTotal program256 Initialization1 (_INT) Time-driven32 Internal32 Operation modeRUN, STOP, DEBUG Self-diagnosisExecution, Delay, Memory error, I/O error, Battery error, Power errorModbus slave Programming portRS-232C (1Ch), USB (1Ch) Data retention at power failureSet “retain” at data declaration Max. expansion stage73Total length 15m Current consumption (mA)960 Weight (Kg)0.12 XGI CPU ItemDescriptionRemarks XGK-CPUUXGK-CPUHXGK-CPUAXGK-CPUSXGK-CPUE Operation methodCyclic execution of stored program, Time-driven interrupt, Process-driven interrupt- I/O control methodBatch processing by scan synchronization (Refresh), Direct input/output by instruction- Program languageLadder diagram, Instruction list, SFC(Sequential Function Chart), ST(Structured Text)- Number of instructionsBasic40- Application700- Processing speedLD0.028㎲/Step0.084㎲/Step- MOVE0.084㎲/Step0.252㎲/Step- Real number operation ± : 0.602㎲(S), 1.078㎲(D) X : 1.106㎲(S), 2.394㎲(D) ÷ : 1.134㎲(S), 2.66㎲(D) ± : 1.442㎲(S), 2.87㎲(D) X : 1.948㎲(S), 4.186㎲(D) ÷ : 1.442㎲(S), 4.2㎲(D)S: Single real number D: Double real number Program capacity128Kstep(512KB)64Kstep(256KB)32Kstep(128KB)16Kstep(64KB)- I/O points(availableto install)6,1443,0721,536- Data areaPP00000 ~ P2047F(32,768 points)- MM00000 ~ M2047F(32,768 points)- KK00000 ~ K2047F(32,768 points)- LL0000 ~ L11263F(180,224 points)- FF0000 ~ F2047F(32,768 points)- T 10ms : T1000 - T1499 100ms : T0000 - T0999 1ms : T2000 - T2047 1ms : T1500 - T1999- CC0000 ~ C2047 SS00.00 ~ S127.99 DD0000 ~ D32,767D0000 ~ D19,999 UU0.0~U7F.31U0.0~U3F.31U0.0~U3F.31U0.0~U1F.31Special module data refresh area Z128 points NN00000 ~ N21503- R2 block1 block32Kwordper1block(R0~R32767) Flash area2M byte, 32 blocksControllable by R device Program typeTotal program256 Initialization1 (_INT) Time-driven32 Internal32 Operation modeRUN, STOP, DEBUG Self-diagnosisExecution, Delay, Memory error, I/O error, Battery error, Power errorModbus slave Programming portRS-232C (1Ch), USB (1Ch) Data retention at power failureSet “retain” at data declaration Max. expansion stage731Total length 15m Current consumption (mA)960940 Weight (Kg)0.12 XGK/XGI CPU built-in Ethernet specification ItemXGI-CPUUNXGI-CPUU/DXGI-CPUUXGI-CPUHXGI-CPUSXGI-CPUERemarks Operation systemReiterative operation, fixed cycle operation, constant scan I/O Control systemScan synchronous batch processing system(refresh system), direct system by command Program languageLadder Diagram, SFC (Sequential Function Chart), ST (Structured Text) Operation processing speed (basic command)Operator18 Basic function136 types + real number operation function Basic function block43 Dedicated function blockDedicated function blocks by special function modules, communication dedicated function block(P2P) Basic0.0085㎲/step0.028㎲/step0.084㎲/step MOVE0.255㎲/step0.084㎲/step0.252㎲/step Real number operation ± : 0.119㎲(S), 0.281㎲(D) X : 0.272㎲(S), 0.680㎲(D) ÷ : 0.281㎲(S), 0.685㎲(D) ± : 0.392㎲(S), 0.924㎲(D) X : 0.896㎲(S), 2.240㎲(D) ÷ : 0.924㎲(S), 2.254㎲(D) ± : 1.442㎲(S), 2.87㎲(D) X : 1.948㎲(S), 4.186㎲(D) ÷ : 1.442㎲(S), 4.2㎲(D)S: Single real number D: Double real number Program memory capacity2M1M512KB128KB64KB I/O points (installable)6,144 points3,072 points1,536 points Max. I/O memory contact131,072 points32,768 points Data memorySymbolic variable area(A)1024KB (max. 512KB retain settable)512KB (max. 256KB retain settable)128KB (max. 64KB retain settable)64KB (max. 32KB retain settable) I variable(I)16KB4KB Q variable(I)16KB4KB Direct variableM512KB (max. 256KB retain settable)256KB (max. 128KB retain settable)64KB (max. 32KB retain settable)32KB (max. 16KB retain settable) R64KB X 16block64KB X 2block64KB X 1block32KB X 1block W1,024KB128KB64KByte32KByteR Flag variableF8KB4KBSystem flag K16KB4KBPID flag L22KBHigh speed link flag N42KBP2PParameters U8KB4KB2KBAnalog data Refresh Flash area2MB, 32block1MB, 16block TimerNo point limit Time range: 0.001~ 4,294,967.295 second(1,193 hours)20 bytes of symbolic variable area per point CounterNo point limit Coefficient range : 64 bit expression8 bytes of symbolic variable area per point Program structureTotal no. of programs256 Initialization task1 Fixed cycle task32 Internal device task32 Operation modeRUN, STOP, DEBUG Restart modeCold, Warm Self diagnosisOperation delay monitoring, memory fault, I/O fault, battery fault, power fault and etc Data protection in case of power failureRetain area setting by basic parameters Max. base extension731Total length 15m Current consumption(mA)960mA940mA Weight (kg)0.12kg More Information ItemXGK-CPUSN, CPUHN, CPUUN / XGI-CPUUNRemarks EthernetFeature1 Port- 10/100BASE-TX- Auto negotiation (Full-duplex and half duplex)- Auto MDIX Crossover- Max. Support 4 channelSupport 8Kbyte each send and receive channel Max. Distance between nodes : 100m- Max. Protocol size : 1500ByteIP Fragmentation is not supported. CableUTP, STP, FTP cables is availableFTP, STP is recommended to prevent noise ServiceSetting communication parameters with XG5000- Loader service (XG5000 connection) supportedRemote stage 1 connection with PLC is available LS protocol(XGT) supported.Server & TCP supported. Client & UDP not supported. Other company’s protocol (Modbus TCP/IP) supported
Nhận báo giá tốt nhất
Nhận báo giá tốt nhất
Nhận báo giá tốt nhất
Nhận báo giá tốt nhất