Đang tải trang
Liên hệ
Sản phẩm cần báo giá theo số lượng, công suất hoặc dự án. Gửi yêu cầu để được tư vấn nhanh.
Tổng quan
GIMAC-V GIMAC-V Thiết bị đo lường và điều khiển tích hợp kỹ thuật số đa chức năng cao cấp - Loại màn hình cảm ứng LCD đồ họa màu. Contact us Features Chức Năng Đo Lường • Đo lường chính xác cao các yếu tố đo lường khác nhau (35 yếu tố) • Đo lường chất lượng điện năng mở rộng (Hài 63, THD, TDD, K-factor, Crest factor) • Ghi lại sự kiện (20~1024 mẫu) • Chức năng Chọn Trước Khi Vận Hành (SBO) • Điều khiển Hệ số Công suất Tự động (APFC) (tùy chọn) • Đo sóng quá độ và sự kiện Chức Năng Tiện Lợi • Màn hình cảm ứng đồ họa màu LCD • Menu chọn ngôn ngữ và người dùng • Phần mềm quản lý kết nối PC • Thống kê và xu hướng cho các yếu tố đo lường Tính Năng Mở Rộng Chức Năng Giao Tiếp • Các chức năng giao tiếp đa dạng (3 cổng) Specification APEC TypeMeasuring itemDatiled measuring itemAccuracy Voltage (V)Line voltageVab, Vbc, Vca, Vlavg Note0.2% Phase voltageVa, Vb, Vc, Vnavg0.2% Normal, reversed-phase voltageV1, V2- Crest FactorVab, Vbc, Vca, Va, Vb, Vc- CurrentPhase currentIa, Ib, Ic, Iavg0.2% XPhase currentIx0.2% Normal, reversed-phase currentsI1, I2- Crest FactorIa, Ib, Ic- PhaseLine voltage∠Vab, ∠Vbc, ∠Vca0.5° Phase voltage∠Va, ∠Vb, ∠Vc0.5° Phase current∠Ia, ∠Ib, ∠Ic, ∠Ix0.5° ElectricityActive powerPa, Pb, Pc, ΣP0.5class Reactive powerQa, Qb, Qc, ΣQ0.5class Apparent powerSa, Sb, Sc, ΣS0.5class Electricity energyActive energyWHa, WHb, WHc, ΣWH0.5class Reactive energyVARHa, VARHb, VARHc, ΣVARH0.5class Reverse active energyrWHa, rWHb, rWHc, ΣrWH0.5class Reverse reactive energyrVARHa, rVARHb, rVARHc, ΣrVARH0.5class Apparent energyVAHa, VAHb, VAHc, ΣVAH0.5class freqFrequencyF(Hz)0.1% Power FactorPower Factor(PF)Power Factor Power Factor(PF) PFa, PFb, PFc, ΣPF phasephase accuracy 1st harmonic power factor (DPF)DPFa, DPFb, DPFc, ΣDPF HarmonicsLine voltageVab, Vbc, Vca 2~63th Harmonics- Phase voltageVa, Vb, Vc 2~63th Harmonics Phase currentIa, Ib, Ic 2~63th Harmonics- THDVab, Vbc, Vca, Va, Vb, Vc, Ia, Ib, Ic TDDIa, Ib, Ic K-FACTORIa, Ib, Ic AI4~20mAAI01, AI020.5% Specification TypeAPEC BANK settingBANK number0-8 Alarm number0-1 Capacitor capacitance settingNone ~ 999MVA Alarm contact settingSetting one of extra contact out of DO_01~DO_08 Capacitor closing delay time10~300sec / 1sec Dead time (time for charge or discharge)10~300sec / 1sec Maximum power factor setting 0.95~1~ -0.90 ( - : indicating lead phase) Minimum power factor setting0.80 ~ 0.95 Alarm power factor setting (Alarm occurred)0.00 ~ 0.90 Event occurrence Under Voltage and control Over PFLow CurrentSet whether to get EVENT occurred or set the control in case the average current of 3 phase is 1A Under VoltageSet whether to get EVENT occurred or set the control in case phase voltage ( 3 phase 3 wire, open delta, line voltage) Over PFSet whether to get EVENT occurred or not when over Max. PF Under PFSet whether to get EVENT occurred or not when over Min. PF Over Volt THDSet whether to get EVENT occurred and BANK control or not when THD is above the setpoint Power Factor controlAutomatic controlAuto Manual controlManual Combination controlIn case all capacitances are set Circulation controlCapacitor In case capacitances are not set - Opening the closed one first and closing the opened last ※ Avoid places with vibration, shock, dust, moisture, corrosive, gas, etc. More Information RatingSpecification Wiring system3P4W, 3P3W(Y), 3P3W(OPEN-DELTA), 1P3W, 1P2W Rated frequency60Hz or 50Hz Measuring voltage range10 ~ 452V(Va, Vb, Vc - Vn voltage at both terminals) Measuring current range0.05 ~ 6A PT, CT input burdeneach less than 0.2VA Rated Controlled powerDC 110V±20% Digital Input PowerDI 6 Point (DC 110V) Power Consumption20W or less normally, 30W or less at operation DO rated outputDO 1~7 RELAYAC 250V 5A, DC 30V 5AResistive load (COSθθ= 1) DO 8 RELAY (C contacts)AC 250V 16A, DC 30V 16A CB_ON, CB_OFF RELAYAC 250V 16A, DC 30V 16A Operating temperature-10℃ ~ 55℃ Storage temperature-25℃ ~ 75℃ Operating humidityWithin 80% RH, no condensation AltitudeLess than 2,000 m above sea level Insulation Resistance OverDC 10㏁ / 5㏁ Insulation VoltageAC 2kV (1kV) / 1min Impulse VoltageAC 5kV (3kV) / 1.2×50㎲ Overload withstandCurrent2 In for 3 hours, 20 In for 2 seconds Voltage1.15 Vn for 3 hours Fast Transient DisturbancePower Input 4kV, Other Input 2kV (Analog Input 1kV) ESD(Electrostatic Discharge)Air 8kV, Contact 6kV StandardsIEC 60255, IEC 61326, IEC 61000-4, KEMC 1110 Communication typeMODBUS-TCP • MODBUS TCP(10/100 Base-Tx) : 1Port • Communication speed : 10/100 MBps, Star Type, UTP (CAT.3, CAT.5) • Communication distance, max.100m (HUB to terminal) MODBUS-RTU • MODBUS RTU(RS485) : 2Ports • Operation mode Differential, Universal 9,600 / 19,200/38,400bps • Communication distance, max 1.2km, Universal RS485 Shielded twisted pair cable • Transmission system, max Half-Duplex, output voltage -7V ~ +12V Size / Weight (W×H×D)190×255×116(mm), 3.6kg
| AI | 4~20mA |
|---|---|
| TDD | Ia, Ib, Ic |
| THD | Vab, Vbc, Vca, Va, Vb, Vc, Ia, Ib, Ic |
| Type | Measuring item | APEC |
| freq | Frequency |
| F(Hz) | 0.1% |
| Phase | Line voltage |
| Rating | Specification |
| Current | Phase current |
| Over PF | Set whether to get EVENT occurred or not when over Max. PF |
| Voltage | 1.15 Vn for 3 hours |
| Altitude | Less than 2,000 m above sea level |
| K-FACTOR | Ia, Ib, Ic |
| Under PF | Set whether to get EVENT occurred or not when over Min. PF |
| Harmonics | Line voltage |
| Standards | IEC 60255, IEC 61326, IEC 61000-4, KEMC 1110 |
| AI01, AI02 | 0.5% |
| MODBUS-RTU | • MODBUS RTU(RS485) : 2Ports • Operation mode Differential, Universal 9,600 / 19,200/38,400bps • Communication distance, max 1.2km, Universal RS485 Shielded twisted pair cable • Transmission system, max Half-Duplex, output voltage -7V ~ +12V |
| Electricity | Active power |
| Voltage (V) | Line voltage |
| Alarm number | 0-1 |
| BANK setting | BANK number | 0-8 |
| Crest Factor | Vab, Vbc, Vca, Va, Vb, Vc | - | Ia, Ib, Ic | - |
| Power Factor | Power Factor(PF) |
| Over Volt THD | Set whether to get EVENT occurred and BANK control or not when THD is above the setpoint |
| Phase current | ∠Ia, ∠Ib, ∠Ic, ∠Ix | 0.5° | Ia, Ib, Ic 2~63th Harmonics | - |
| Phase voltage | Va, Vb, Vc, Vnavg | 0.2% | ∠Va, ∠Vb, ∠Vc | 0.5° | Va, Vb, Vc 2~63th Harmonics |
| Under Voltage | Set whether to get EVENT occurred or set the control in case phase voltage ( 3 phase 3 wire, open delta, line voltage) |
| Wiring system | 3P4W, 3P3W(Y), 3P3W(OPEN-DELTA), 1P3W, 1P2W |
| Apparent power | Sa, Sb, Sc, ΣS | 0.5class |
| Manual control | Manual |
| Reactive power | Qa, Qb, Qc, ΣQ | 0.5class |
| XPhase current | Ix | 0.2% |
| Apparent energy | VAHa, VAHb, VAHc, ΣVAH | 0.5class |
| DO rated output | DO 1~7 RELAY |
| Impulse Voltage | AC 5kV (3kV) / 1.2×50㎲ |
| Pa, Pb, Pc, ΣP | 0.5class |
| Rated frequency | 60Hz or 50Hz |
| Reactive energy | VARHa, VARHb, VARHc, ΣVARH | 0.5class |
| Thương hiệu | LS Electric |
| Ia, Ib, Ic, Iavg | 0.2% |
| Power Consumption | 20W or less normally, 30W or less at operation |
| Communication type | MODBUS-TCP | • MODBUS TCP(10/100 Base-Tx) : 1Port • Communication speed : 10/100 MBps, Star Type, UTP (CAT.3, CAT.5) • Communication distance, max.100m (HUB to terminal) |
| Electricity energy | Active energy |
| Insulation Voltage | AC 2kV (1kV) / 1min |
| Operating humidity | Within 80% RH, no condensation |
| Overload withstand | Current | 2 In for 3 hours, 20 In for 2 seconds |
| CB_ON, CB_OFF RELAY | AC 250V 16A, DC 30V 16A |
| Circulation control | Capacitor In case capacitances are not set - Opening the closed one first and closing the opened last |
| Combination control | In case all capacitances are set |
| Communication speed | 10/100 MBps, Star Type, UTP (CAT.3, CAT.5) |
| Digital Input Power | DI 6 Point (DC 110V) |
| PT, CT input burden | each less than 0.2VA |
| Storage temperature | -25℃ ~ 75℃ |
| WHa, WHb, WHc, ΣWH | 0.5class |
| Power Factor control | Automatic control | Auto |
| AC 250V 5A, DC 30V 5A | Resistive load (COSθθ= 1) |
| Alarm contact setting | Setting one of extra contact out of DO_01~DO_08 |
| Operating temperature | -10℃ ~ 55℃ |
| Reverse active energy | rWHa, rWHb, rWHc, ΣrWH | 0.5class |
| Datiled measuring item | Accuracy |
| Rated Controlled power | DC 110V±20% |
| ∠Vab, ∠Vbc, ∠Vca | 0.5° |
| DO 8 RELAY (C contacts) | AC 250V 16A, DC 30V 16A |
| Measuring current range | 0.05 ~ 6A |
| Measuring voltage range | 10 ~ 452V(Va, Vb, Vc - Vn voltage at both terminals) |
| Reverse reactive energy | rVARHa, rVARHb, rVARHc, ΣrVARH | 0.5class |
| Size / Weight (W×H×D) | 190×255×116(mm), 3.6kg |
| Vab, Vbc, Vca, Vlavg Note | 0.2% |
| Fast Transient Disturbance | Power Input 4kV, Other Input 2kV (Analog Input 1kV) |
| Insulation Resistance Over | DC 10㏁ / 5㏁ |
| Capacitor closing delay time | 10~300sec / 1sec |
| ESD(Electrostatic Discharge) | Air 8kV, Contact 6kV |
| Maximum power factor setting | 0.95~1~ -0.90 ( - : indicating lead phase) |
| Minimum power factor setting | 0.80 ~ 0.95 |
| Capacitor capacitance setting | None ~ 999MVA |
| Normal, reversed-phase voltage | V1, V2 | - |
| Vab, Vbc, Vca 2~63th Harmonics | - |
| 1st harmonic power factor (DPF) | DPFa, DPFb, DPFc, ΣDPF |
| Normal, reversed-phase currents | I1, I2 | - |
| MODBUS-RTU • MODBUS RTU(RS485) | 2Ports |
| Dead time (time for charge or discharge) | 10~300sec / 1sec |
| Alarm power factor setting (Alarm occurred) | 0.00 ~ 0.90 |
| Maximum power factor setting 0.95~1~ -0.90 ( - | indicating lead phase) |
| Event occurrenceUnder Voltageand control Over PF | Low Current | Set whether to get EVENT occurred or set the control in case the average current of 3 phase is 1A |
| Power Factor Power Factor(PF) PFa, PFb, PFc, ΣPF phase | phase accuracy |
| Communication typeMODBUS-TCP • MODBUS TCP(10/100 Base-Tx) | 1Port |
GIMAC-V Thiết bị đo lường và điều khiển tích hợp kỹ thuật số đa chức năng cao cấp - Loại màn hình cảm ứng LCD đồ họa màu. Contact us Features Chức Năng Đo Lường • Đo lường chính xác cao các yếu tố đo lường khác nhau (35 yếu tố) • Đo lường chất lượng điện năng mở rộng (Hài 63, THD, TDD, K-factor, Crest factor) • Ghi lại sự kiện (20~1024 mẫu) • Chức năng Chọn Trước Khi Vận Hành (SBO) • Điều khiển Hệ số Công suất Tự động (APFC) (tùy chọn) • Đo sóng quá độ và sự kiện Chức Năng Tiện Lợi • Màn hình cảm ứng đồ họa màu LCD • Menu chọn ngôn ngữ và người dùng • Phần mềm quản lý kết nối PC • Thống kê và xu hướng cho các yếu tố đo lường Tính Năng Mở Rộng Chức Năng Giao Tiếp • Các chức năng giao tiếp đa dạng (3 cổng) Specification APEC TypeMeasuring itemDatiled measuring itemAccuracy Voltage (V)Line voltageVab, Vbc, Vca, Vlavg Note0.2% Phase voltageVa, Vb, Vc, Vnavg0.2% Normal, reversed-phase voltageV1, V2- Crest FactorVab, Vbc, Vca, Va, Vb, Vc- CurrentPhase currentIa, Ib, Ic, Iavg0.2% XPhase currentIx0.2% Normal, reversed-phase currentsI1, I2- Crest FactorIa, Ib, Ic- PhaseLine voltage∠Vab, ∠Vbc, ∠Vca0.5° Phase voltage∠Va, ∠Vb, ∠Vc0.5° Phase current∠Ia, ∠Ib, ∠Ic, ∠Ix0.5° ElectricityActive powerPa, Pb, Pc, ΣP0.5class Reactive powerQa, Qb, Qc, ΣQ0.5class Apparent powerSa, Sb, Sc, ΣS0.5class Electricity energyActive energyWHa, WHb, WHc, ΣWH0.5class Reactive energyVARHa, VARHb, VARHc, ΣVARH0.5class Reverse active energyrWHa, rWHb, rWHc, ΣrWH0.5class Reverse reactive energyrVARHa, rVARHb, rVARHc, ΣrVARH0.5class Apparent energyVAHa, VAHb, VAHc, ΣVAH0.5class freqFrequencyF(Hz)0.1% Power FactorPower Factor(PF)Power Factor Power Factor(PF) PFa, PFb, PFc, ΣPF phasephase accuracy 1st harmonic power factor (DPF)DPFa, DPFb, DPFc, ΣDPF HarmonicsLine voltageVab, Vbc, Vca 2~63th Harmonics- Phase voltageVa, Vb, Vc 2~63th Harmonics Phase currentIa, Ib, Ic 2~63th Harmonics- THDVab, Vbc, Vca, Va, Vb, Vc, Ia, Ib, Ic TDDIa, Ib, Ic K-FACTORIa, Ib, Ic AI4~20mAAI01, AI020.5% Specification TypeAPEC BANK settingBANK number0-8 Alarm number0-1 Capacitor capacitance settingNone ~ 999MVA Alarm contact settingSetting one of extra contact out of DO_01~DO_08 Capacitor closing delay time10~300sec / 1sec Dead time (time for charge or discharge)10~300sec / 1sec Maximum power factor setting 0.95~1~ -0.90 ( - : indicating lead phase) Minimum power factor setting0.80 ~ 0.95 Alarm power factor setting (Alarm occurred)0.00 ~ 0.90 Event occurrence Under Voltage and control Over PFLow CurrentSet whether to get EVENT occurred or set the control in case the average current of 3 phase is 1A Under VoltageSet whether to get EVENT occurred or set the control in case phase voltage ( 3 phase 3 wire, open delta, line voltage) Over PFSet whether to get EVENT occurred or not when over Max. PF Under PFSet whether to get EVENT occurred or not when over Min. PF Over Volt THDSet whether to get EVENT occurred and BANK control or not when THD is above the setpoint Power Factor controlAutomatic controlAuto Manual controlManual Combination controlIn case all capacitances are set Circulation controlCapacitor In case capacitances are not set - Opening the closed one first and closing the opened last ※ Avoid places with vibration, shock, dust, moisture, corrosive, gas, etc. More Information RatingSpecification Wiring system3P4W, 3P3W(Y), 3P3W(OPEN-DELTA), 1P3W, 1P2W Rated frequency60Hz or 50Hz Measuring voltage range10 ~ 452V(Va, Vb, Vc - Vn voltage at both terminals) Measuring current range0.05 ~ 6A PT, CT input burdeneach less than 0.2VA Rated Controlled powerDC 110V±20% Digital Input PowerDI 6 Point (DC 110V) Power Consumption20W or less normally, 30W or less at operation DO rated outputDO 1~7 RELAYAC 250V 5A, DC 30V 5AResistive load (COSθθ= 1) DO 8 RELAY (C contacts)AC 250V 16A, DC 30V 16A CB_ON, CB_OFF RELAYAC 250V 16A, DC 30V 16A Operating temperature-10℃ ~ 55℃ Storage temperature-25℃ ~ 75℃ Operating humidityWithin 80% RH, no condensation AltitudeLess than 2,000 m above sea level Insulation Resistance OverDC 10㏁ / 5㏁ Insulation VoltageAC 2kV (1kV) / 1min Impulse VoltageAC 5kV (3kV) / 1.2×50㎲ Overload withstandCurrent2 In for 3 hours, 20 In for 2 seconds Voltage1.15 Vn for 3 hours Fast Transient DisturbancePower Input 4kV, Other Input 2kV (Analog Input 1kV) ESD(Electrostatic Discharge)Air 8kV, Contact 6kV StandardsIEC 60255, IEC 61326, IEC 61000-4, KEMC 1110 Communication typeMODBUS-TCP • MODBUS TCP(10/100 Base-Tx) : 1Port • Communication speed : 10/100 MBps, Star Type, UTP (CAT.3, CAT.5) • Communication distance, max.100m (HUB to terminal) MODBUS-RTU • MODBUS RTU(RS485) : 2Ports • Operation mode Differential, Universal 9,600 / 19,200/38,400bps • Communication distance, max 1.2km, Universal RS485 Shielded twisted pair cable • Transmission system, max Half-Duplex, output voltage -7V ~ +12V Size / Weight (W×H×D)190×255×116(mm), 3.6kg
